Below is our recommended measuring
guide.
Cross-section of a typical door frame - (Single
Door)
For the width of your glass door measure from rebate to rebate,
as shown above, and deduct 6mm from the measurement, i.e;
Width (rebate to rebate) = 762mm - 6mm = 756mm, this would
be your glass door width.
Cross-section of a typical door frame - (Double
Doors)
For the width of your glass doors measure from rebate to rebate,
as shown above, and deduct 9mm from the measurement, i.e;
Width (rebate to rebate) = 1498mm - 9mm = 1489mm, this would
be your double glass door width (We then half this measurement,
(744.5mm) which gives us the size of each door. However because
we cannot manufacture to 0.5 of a mm each door size rounded
down to the nearest mm. So each door size would be 744mm and
the double door size would be 1498mm.
To measure your height:
For the height of you glass door, measure from rebate to finished
floor level (ie; carpet, laminate, tiles, etc) as shown above
and deduct 10mm from the measurement ie;
Height (rebate to finished floor level) = 1982mm - 10mm =
1972mm, this would be your glass door height.
These are our recommended measuring instructions to
be used as guidance only.
|